 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TOTAL POWER INT'L 200W Single Output with PFC Function Features : Universal AC input / full range Built-in active PFC function, PF>0.93 Protections:Short circuit/Over load/Over voltage/Over temperature Built-in cooling fan speed control Built-in constant current limiting circuit Built-in fan speed control Remote ON-OFF control(Optional) LED indicator for power on 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SP-200 series SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT SP-200-3.3 3.3V 40A 0 ~ 40A 132W SP-200-5 5V 40A 0 ~ 40A 200W SP-200-7.5 7.5V 26.7A 0 ~ 26.7A 200.2W 100mVp-p 2.0% 0.5% R SP-200-12 12V 16.7A 0 ~ 16.7A 200.4W 100mVp-p 2.0% 0.5% 0.5% SP-200-13.5 SP-200-15 13.5V 14.9A 0 ~ 11.2A 201.1W 100mVp-p 2.0% 0.5% 0.5% SP-200-24 24V 8.4A 0 ~ 8.4A 201.6W 150mVp-p 1.0% 0.5% 0.5% SP-200-27 27V 7.5A 0 ~ 7.5A 202.5W 150mVp-p 1.0% 0.5% 0.5% SP-200-48 48V 4.2A 0 ~ 4.2A 201.6W 250mVp-p 1.0% 0.5% 0.5% 15V 13.4A 0 ~ 13.4A 201W 100mVp-p 2.0% 0.5% 0.5% RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p VOLTAGE ADJ. RANGE 3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 LINE REGULATION 2.0% 0.5% 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V 2.0% 0.5% LOAD REGULATION SETUP, RISE, HOLD TIME VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR INPUT EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT (max.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE 1.0% 1.0% 1.0% 600ms, 30ms, 20ms at full load 85 ~ 264VAC 47~63Hz PF>0.93/230VAC 65% 120 ~ 370VDC PF>0.98/115VAC at full load 76% 79% 80% 81% 83% 83% 84% 71% 3.5A/115VAC 1.7A/230VAC COLD START 40A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.46V 5.5 ~ 6.75V 8.25 ~ 10.13V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5 ~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.45V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE FUNCTION 95 5 (TSW1 : Detect on heatsink of power transistor) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down REMOTE CONTROL(OPTION) CN1:4 ~ 10VDC POWER ON, <0 ~ 0.8VDC POWER OFF -10 ~ +60 (Refer to output load derating curve) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC (Note 4) -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 and S-MARK J60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 183.8K hrs min. MIL-HDBK-217F (25 199*99*50mm (L*W*H) 0.85Kg; 20pcs/17.9Kg/1.28CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 200W Single Output with PFC Function SP-200 Case No. 916B series Mechanical Specification 199 20 25 Unit:mm 35 117 133 70 65 47 R.C. +V ADJ. LED 7 35.2 CN1 1 2 9.5 6 5 4 49.5 5-M3 L=3mm 51 2-M4 L=5mm 3 2 1 8 38 15 142 25 16 Air flow direction 25 25 4-M4 L=6mm Terminal pin number assignment : Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4,5 6,7 Assignment DC OUTPUT -V DC OUTPUT +V Remote ON/OFF(CN1):JST S2B-XH or equivalent(optional) Pin No. 1 2 Assignment RC+ RCMating Housing JST XHP or equivalent Terminal JST SXH-001T-P0.6 or equivalent Derating Curve Output Derating VS Input Voltage Ta=25 100 100 90 80 80 70 60 LOAD (%) LOAD (%) 40 60 50 40 20 -10 0 10 20 30 40 50 60 (HORIZONTAL) 85 100 115 135 12.5 50 10 155 119 230 79 99 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (VAC) 60Hz |
Price & Availability of SP-200
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |